Moxa CP-138U-I-T Instrukcja Użytkownika Pobierz pdf (Strona 13)

Universal PCI Board User’s Manual Introduction

1-8

Driver Support: Windows 2000

Windows XP/2003/Vista/2008 (x86 & x64)

Linux 2.4

Linux 2.6 (x86 & x64)

Complete driver support information is available at www.moxa.com

the Download center.

Power Output: 5V/12V (POS-104UL only)

Power and Environment

Operating Temperature: 0 to 55°C (32 to 131°F)

Operating Humidity: 5 to 95% RH

Storage Temperature: -40 to 85°C (-40 to 185°F)

Protection: Embedded 15 KV ESD protection

Certifications

Approved: EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3,

IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5,

IEC61000-4-6, IEC61000-4-8, IEC61000-4-11, FCC Part 15 Class B

Warranty

5 years

Installation Guide

UPCI board installation can be divided into six steps as follows:

Step 1: Select serial transmission mode.

For certain models, you will need to set onboard DIP switches to select the serial transmission mode

for each port. This applies to the CP-118U-I, CP-138U-I, CP-118U, CP-138U, CP-114UL,

CP-114UL-I, CP-134U, CP-134U-I, CP-112UL, CP-112UL-I, CP-132UL, CP-132UL-I,

POS-104UL, and CP-102UF. For details, please refer to Chapter 2.

Step 2: Install board.

UPCI boards are installed in an open PCI or PCI-X expansion slot on the PC. For details, please refer

to Chapter 2.

Step 3: Install drivers and configure board

For details, please refer to Chapters 3 through 8.

Step 4: Connect your serial devices to the board’s serial ports

For details, please refer to Chapter 10.

Step 5: Restart system and verify driver initialization

For details, please refer to Chapters 3 through 8.

Step 6: Develop and run your serial communication application

For details, please refer to Chapter 9.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 140 141

Brak uwag

Moxa CP-138U-I-T Instrukcja Użytkownika Strona 13