Moxa IOLOGIK E2212 Instrukcja Użytkownika Pobierz pdf (Strona 15)

Click&Go User’s Manual Getting Started

2-3

Connecting to the Network

1. Connect the ioLogik to the host PC with an Ethernet cable. For initial configuration, it is

recommended that the ioLogik E2000 series product be configured using a direct connection to

a host computer rather than remotely over the Internet.

2. Set the host PC’s IP address to 192.168.127.xxx. (xxx: from 001 to 253). In Windows, you can

adjust this setting through the Control Panel.

Default IP Address Default Netmask Default Gateway

192.168.127.254 255.255.255.0 None

3. Use ioAdmin configuration utility to detect the ioLogik. Once the ioLogik has been detected,

modify the settings as needed for your network environment, then restart the server.

Optional Liquid Crystal Display Module (LCM)

The ioLogik E2000 series supports an optional hot-pluggable Liquid Crystal Module (LCM) for

field management and configuration. The LCM can display network and I/O settings such as digital

input mode and value. The ioLogik E2000 series’ IP address and netmask can also be configured

using the LCM, and one LCM can be used to maintain and configure multiple ioLogik products.

Optional Accessories

y LDP1602 ioLogik LCM (Liquid Crystal Display Module)

Adding More I/O Channels

A cost-effective way to add more I/O channels to your Ethernet-based ioLogik E2000 series is to

attach an appropriate RS-485 ioLogik R2000 series I/O. However, it is important to remember that

Click&Go local control logic does NOT

apply to the expanded channels from an external ioLogik.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 105 106

Brak uwag

Moxa IOLOGIK E2212 Instrukcja Użytkownika Strona 15