Moxa VPORT 254-M-SC-T Instrukcja Użytkownika Pobierz pdf (Strona 16)

VPort 254 User’s Manual Introduction

1-10

NOTE

T Please refer to the VPort 254’s Quick Installation Guide to learn how to wire the digital inputs

and relay outputs.

RS-232 Console Port

The VPort 254 has one RS-232 (10-pin RJ45) console port located on the top panel. Use either an

RJ45-to-DB9 cable or RJ45-to-DB25 cable to connect the VPort 254’s console port to your PC’s

COM port. You may then use a console terminal program, such as Moxa PComm Terminal

Emulator, to access the VPort 254’s console configuration utility.

Reset Button

A recessed RESET button is provided for rebooting and restoring the system to the factory default

settings. Use a pointed object, such as a straightened paper clip or toothpick, to press the reset

button.

1. Reboot:

To reboot the VPort 254, power it off and then power it back on again, or push the RESET button

one time. The STAT LED will light in red as the POST (Power On Self Test) process runs. When

the rebooting process is finished, the STAT LED will change to a green color.

2. Restore to Factory Settings:

A recessed RESET button is provided for restoring the system to the factory default settings.

When the system fails to install properly, or operates abnormally, use the RESET button located

on the top panel of the VPort 254 to restore the factory defaults.

To do this, use a pointed object such as a straightened paper clip or toothpick to hold in the reset

button, and then release the reset button when the STAT LED stops flashing in red. At this point,

the POST process will run, and the VPort will reboot. The STAT LED will illuminate in green

when the VPort has finished rebooting.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 97 98

Brak uwag

Moxa VPORT 254-M-SC-T Instrukcja Użytkownika Strona 16