Moxa AWK-1100 Instrukcja Użytkownika Pobierz pdf (Strona 20)

AirWorks AWK-1100 User’s Manual Web Console Configuration

To upgrade the firmware of the AWK-1100 by HTTP:

1. Click Browse and then select a correct firmware .bin file. The firmware file path will be

shown in the Firmware file name text box.

2. Click Upgrade to begin the upgrade process.

Backing up and Restoring Configuration Settings by HTTP

To back up the configuration of the AWK-1100 by HTTP (i.e., export the configuration to a file)::

1. Click on Back Up

2. You will be prompted to open or save the configuration file. Click on Save.

3. The configuration file is named with the AWK-1100’s MAC address. For example, if the

AWK-1100’s MAC address is 00-01-02-33-44-55, the configuration backup file should be

“000102334455.hex”. Don’t change the configuration file name in the Save As dialog box.

Select the folder in which the configuration file is to be stored, and then click on Save.

NOTE

The procedure may be different for different Web browsers (IE, Netscape, etc.).

To restore the configuration of the AWK-1100 by HTTP (i.e., import the configuration from a

file):

1. Click Browse and then select the correct configuration .hex file. You must make sure the file

name is the AWK-1100’s MAC address. The firmware file path will be shown in the

Firmware file name text box.

2. Click Restore to upload the configuration file to the AWK-1100.

Upgrading Firmware by TFTP

When using TFTP as the firmware management protocol, you can configure settings for the AP’s

TFTP client to communicate with a TFTP server. If the TFTP client does not get a response from

the TFTP server within a period specified by the Timeout setting, it will resend the previous

request. The Max number of retries setting specifies the maximum number of resends before the

TFTP client stops communicating with the TFTP server.

3-7

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Brak uwag

Moxa AWK-1100 Instrukcja Użytkownika Strona 20