Moxa AWK-1100 Instrukcja Użytkownika Pobierz pdf (Strona 21)

AirWorks AWK-1100 User’s Manual Web Console Configuration

To upgrade the AWK-1100’s firmware by TFTP:

1. Prepare a computer that will be used as a TFTP server and as a managing computer to trigger

the upgrade process.

2. Connect the computer and one of the LAN Ethernet switch port with a normal Ethernet cable.

3. Configure the IP address of the computer so that the AWK-1100 and the computer are on the

same IP subnet.

4. On the computer, run the TFTP Server utility, and specify the folder in which the firmware

files will be placed.

5. On the computer, run a Web browser and click the General, Firmware Tools hyperlink.

6. Choose TFTP as the Firmware management protocol.

7. Specify the IP address of the computer, which acts as a TFTP server. If you don’t know the IP

address of the computer, open a Command Prompt, and type ipconfig, then press the Enter

key.

8. Trigger the firmware upgrade process by clicking Upgrade.

3-8

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Brak uwag

Moxa AWK-1100 Instrukcja Użytkownika Strona 21