Moxa AWK-1100 Instrukcja Użytkownika Pobierz pdf (Strona 8)

AirWorks AWK-1100 User’s Manual Getting Started

First-Time Installation and Configuration

Before installing the AWK-1100, check to make sure that all items in the Package Checklist are in

the box. In addition, you will need access to a notebook computer or PC equipped with an Ethernet

port. The AWK-1100 has a default IP address that you must use when connecting to the

AWK-1100 for the first time.

NOTE

For testing requirements, if you only have one AWK-1100, we strongly suggest that you prepare

a notebook computer or PC with a wireless LAN adapter installed. After finishing the installation

and configuration, you should test the AWK-1100 to make sure the wireless transmission is

working normally.

Step 1: Select the Power Source

The AWK-1100 can be powered by a DC power input, or by PoE (Power over Ethernet). The

AWK-1100 will use the power source that you choose.

NOTE

The PoE capability of the bridge is PowerDsine-compatible. Please visit PowerDsine’s website

for more information (http://www.powerdsine.com

Step 2: Connect the AWK-1100 to a notebook or PC

Since the AWK-1100 supports MID/MID-X auto-sensing, you can use either a straight-through

cable or cross-over cable to connect the AWK-1100 to the notebook, if the LAN LED on the

AWK-1100’s front panel lights up, it means the connection is established.

Step 3: Set up the computer’s IP address

In a Windows environment, the computer’s IP address can be changed in the TCP/IP settings

window. Select an IP address on the same subnet as the AWK-1100. Since the AWK-1100’s

default IP address is 192.168.127.253, and the subnet mask is 255.255.255.0, you should set the IP

address of the computer to 192.168.127.xxx.

Step 4: Use the web-based manager to configure the AWK-1100

Open your computer’s web browser and then type http://192.168.127.253 in the address box to

access the homepage of the web-based Network Manager. Before the homepage opens, you will

need to enter the user name and password as shown in the following figure. For first-time

configuration, enter the default user name and password and then click on OK:

Default user name & password

User name: admin

Password: root

192.168.127.253

2-2

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Brak uwag

Moxa AWK-1100 Instrukcja Użytkownika Strona 8